• Using special membrane manufacturing technology, the membrane component structure is strengthened, the risk of scaling and biological contamination is reduced, and the service life of the membrane is extended;

• It has excellent pollution resistance, effectively reduces the membrane replacement cycle and cleaning frequency, and greatly reduces the investment and operating costs of the seawater desalination system;

• It is widely used in zero-discharge treatment of difficult-to-treat water sources such as seawater desalination plants, sub-seawater desalination, and industrial concentrated wastewater.

---Description

• The flow rate of a single membrane element may vary, but the range of variation will not exceed +15%;

• The stable desalination rate generally needs to be tested after 24-48 hours of continuous operation, depending on the inlet water quality and operating conditions.

Maximum operating pressure ································ 1200psi(8.27Mpa)

Maximum inlet flow rate ································ 16m³/h

Free chlorine tolerance a ······························ <0.1ppm

Maximum pressure drop of a single membrane ···························· 15psi(0.1Mpa)

Maximum inlet temperature ································ 45℃

Maximum inlet SDI₁₅ ····························· 5

Continuous operation pH range ^b ······················ 2-11

Short-term cleaning pH range ························· 1-13

a. Under certain conditions, the inlet water contains free chlorine and other oxidants, which will cause serious membrane damage. Oxidative damage is not covered by the product warranty;

b. When pH>10, the continuous operating temperature does not exceed 35℃.