• Without any chlorination or oxidation treatment, the membrane element is guaranteed to have long-term stable and efficient performance;

• It has good resistance to organic, microbial and inorganic pollution, slows down the decay rate of membrane performance and increases the service life of the membrane;

• It is widely used in seawater desalination plants, sub-seawater desalination, industrial concentrated wastewater and other difficult-to-treat water sources with zero discharge treatment.

---Description

• The flow rate of a single membrane element may be different, but the range of variation will not exceed +15%;

• The stable desalination rate generally needs to be tested after 24-48 hours of continuous operation, depending on the inlet water quality and operating conditions.

Maximum operating pressure································ 1200psi(8.27Mpa)

Maximum inlet flow rate ································ 16m³/h

Free chlorine tolerance a ······························ <0.1ppm

Maximum pressure drop of a single membrane ···························· 15psi(0.1Mpa)

Maximum inlet temperature ································ 45℃

Maximum inlet SDI₁₅ ····························· 5

Continuous operation pH range ^b ······················ 2-11

Short-term cleaning pH range ························· 1-13

a. Under certain conditions, the inlet water contains free chlorine and other oxidants, which will cause serious membrane damage. Oxidative damage is not covered by the product warranty terms;

b. When pH>10, the continuous operation temperature does not exceed 35℃.