• Using a special membrane making process, it has a strong ability to resist the adsorption and deposition of organic matter, microorganisms and inorganic matter, greatly improving the pollution resistance;

• By improving the membrane structure design, reducing the flow resistance, reducing the concentration polarization phenomenon;

• Without chlorination and any oxidation treatment, the membrane element is guaranteed to have long-term stable and high-efficiency performance, meeting the treatment requirements of various complex water qualities.

---Description

• The flow rate of a single membrane element may be different, but the range of variation will not exceed +15%;

• The stable desalination rate generally needs to be tested after 24-48 hours of continuous operation, depending on the inlet water quality and operating conditions.

Maximum operating pressure ································ 600psi(4.1Mpa)

Maximum inlet flow rate ································ 17m³/h

Free chlorine tolerance a ······························ <0.1ppm

Maximum pressure drop of a single membrane ···························· 15psi(0.1Mpa)

Maximum inlet temperature ································ 45℃

Maximum inlet water SDI₁₅ ····························· 5

Continuous operation pH range^b ······················ 2-11

Short-term cleaning pH range ························· 1-13

a. Under certain conditions, inlet water containing free chlorine and other oxidants can cause serious membrane damage, which is not covered by the product warranty due to oxidation damage;

b. When pH>10, the continuous operation temperature shall not exceed 35℃.