• Compared with traditional spiral reverse osmosis membrane, the channel width between DTRO membrane components is larger, generally between 2-6mm, which reduces the probability of membrane pores being blocked by pollutants and significantly improves the anti-pollution ability;

• The water flow inside the DTRO membrane component forms a strong turbulent state, which improves the mixing degree, prevents the deposition of pollutants on the membrane surface, and improves the cleaning efficiency and service life of the membrane;

---Description

• The flow rate of a single membrane element may be different, but the range of variation will not exceed +15%;

• The stable desalination rate generally needs to be tested after 24-48 hours of continuous operation, depending on the inlet water quality and operating conditions.

Maximum inlet temperature ································ 40℃

Maximum inlet flow ································ 0.8-1.2m³/h

Continuous operation pH range^b ······················ 2-11

Maximum pressure drop of a single membrane ···························· 100psi(0.7MPa)

Maximum inlet water SDI₁₅ ····························· 20

Free chlorine tolerance a ······························ <0.1ppm

Short-term cleaning pH range ························· 1-12

a. Under certain conditions, inlet water containing free chlorine and other oxidants can cause serious membrane damage, which is not covered by the product warranty terms due to oxidation damage;

b. When pH>10, the continuous operating temperature does not exceed 35℃.